$0
Cost to post — always free
3 Max
Bids per project
48hrs
Typical bid turnaround
$20K–$400K+
Typical project range

Paving & Asphalt in Texas Requires the Right Contractor.

Commercial paving in Texas is a high-stakes project. A poorly designed or installed parking lot fails quickly under Texas heat and traffic — cracking, rutting, and requiring costly repairs within a few years. The difference between a 5-year parking lot and a 20-year parking lot comes down to proper base preparation, mix design, thickness, and drainage — all of which require an experienced commercial paving contractor.

BidBridge Texas matches Texas businesses and property owners with verified commercial paving contractors who specialize in commercial parking lots, site paving, and asphalt work — not residential driveway companies doing commercial work.

What We Match for Paving & Asphalt.

✓Commercial parking lot construction
✓Parking lot resurfacing and overlay
✓Asphalt repair and patching
✓Concrete parking lot construction
✓Drive-through lane paving
✓Loading dock and truck court paving
✓Striping and ADA parking compliance
✓Site paving for new commercial development

Key Considerations for Paving & Asphalt in Texas.

Base Preparation
The most common cause of premature parking lot failure is inadequate base preparation. Texas clay soils require proper subgrade stabilization before any asphalt goes down.
Asphalt Thickness
Commercial parking lots serving cars typically need 3–4" asphalt over 6–8" base. Lots serving trucks or heavy equipment need significantly more. Specify this in your bid.
Drainage Design
Proper slope and drainage is critical. Standing water accelerates asphalt deterioration. Review drainage design before approving the paving plan.
ADA Compliance
Parking lot construction and resurfacing triggers ADA accessibility requirements — accessible spaces, access aisles, and accessible routes to building entrances must meet current standards.
Budget Range: $20K–$400K+
Commercial parking lot paving in Texas typically runs $3–$7 per sq ft for standard asphalt construction. Concrete parking lots run $6–$12 per sq ft. Resurfacing and overlay work runs $2–$4 per sq ft depending on existing conditions.
Estimate your project's cost →

Paving & Asphalt Contractors Across Texas.

We match paving & asphalt projects across all of Texas. Post your project and we'll confirm contractor availability in your city.

Post Once. Get up to 3 Verified Paving & Asphalt Bids.

01
Step 01
Post Free
Describe your paving & asphalt project — scope, budget range, location. Takes 5 minutes.
02
Step 02
Verified Contractors Bid
Verified commercial paving contractors — licensed where Texas requires it and insured — review your project and bid. You see up to 3 bids.
03
Step 03
Review Bids
See structured bids with pricing and timelines. Your contact info stays private.
04
Step 04
Connect Safely
Request contact one contractor at a time. You control the introduction.

Full details on how BidBridge Texas works.

Paving & Asphalt Questions, Answered.

Do paving contractors need a license in Texas?

No. Texas does not license paving contractors at the state level, so check insurance, references and similar commercial lots. Cities often require permits or site plan review for new parking lots and drainage changes, and your contractor should know the local process.

Do parking lots have to meet Texas accessibility rules?

Yes. Accessible parking spaces, access aisles and routes to the entrance must meet the Texas Accessibility Standards. Projects with a total estimated cost of $50,000 or more must be registered with the Texas Department of Licensing and Regulation and get plan review and an inspection from a Registered Accessibility Specialist.

Should I resurface or rebuild my parking lot?

An overlay works when the base is sound and damage is mostly surface cracking. Widespread potholes, rutting or alligator cracking usually mean base failure, which needs full-depth repair or reconstruction. Ask bidders to price both if your lot is borderline.

Asphalt or concrete paving?

Asphalt typically runs $3–$7 per sq ft for new commercial parking lots versus $6–$12 for concrete. Concrete costs more up front but holds up better under truck traffic and dumpster pads, so many lots use asphalt for parking and concrete for truck courts, drive-throughs and loading areas.

Get bids from verified commercial paving contractors

Post your commercial project free and get up to 3 bids from verified contractors, licensed where Texas requires it and insured. Your contact details stay private until you choose to connect.